Categories  
8K Super Encoder And Decoder
R8(JPEG-XS ST 2110 8K UHD Encoder)
R8(8K UHD H.265 Encoder)
D8(JPEG-XS ST 2110 8K UHD Decoder)
D8(8K UHD H.265 Decoder)


4K ST 2110 IP Encoder and Decoder
R6(ST 2110 IP Encoder)
D6(ST 2110 IP Decoder)


4K UHD Video Encoder Decoder
R4(JPEG-XS ST 2110 4K UHD Encoder and Transcoder)
R4(4K UHD H.265 Encoder and Transcoder)
D4(JPEG-XS ST 2110 4K UHD Live Stream Pulling Decoder)
D4(4K UHD H.265 Live Stream Pulling Decoder)


ST 2110 IP and 12G-SDI 4K UHD Transmission Converter
C2110


Multichannel
HD Video H.264 Encoder Transcoder Decoder Platform
RTD Platform1(encoding, 4-channel, IP)
RTD Platform2(encoding, 4-channel, IP + ASI)
RTD Platform3(encoding, 8-channel, IP)
RTD Platform4(Transcoding, IP)
RTD Platform5(Decoding, 4-channel, IP)
RTD Platform6(Decoding, 8-channel, IP)


One channel
HD Video H.264 Encoder
R3(H.264 HD Encoder)
R2(MPEG-2/H.264 HD/SD Encoder)


One channel
SD Video MPEG-2 Encoder
R1(MPEG-2 SD Encoder)


HD Video RTMP Stream Pushing Encoder
RP1(one channel)
RP2(2-channel)
RP4(4-channel)


HD Video RTMP Stream Pulling Decoder
DP1(HD Video RTMP Stream Pulling Decoder)


HD SD Video Decoder
D1(MPEG-2 SD Decoder)
D2(H.264/MPEG-2 HD/SD Decoder)
D3(H.264 HD Decoder)


Audio Decoder
DAP1(2 AES and 4 Analog Audio Stream Pulling Decoder)


Audio Embedder
e1


Audio De-embedder
e2


HD Video Converter
C1(3G/HD/SDI to HDMI)
C2(HDMI to 3G/HD/SDI)
C3(SDI to CVBS)
C4(CVBS to SDI)
C5(YPbPr to HD-SDI)
C6(HD-SDI to YPbPr)
C7(Analog Video to 3G/HD/SDI)
C8(3G/HD/SDI to Analog Video)
C9(VGA to 3G/HD/SDI)
C10(3G/HD/SDI to VGA)
C11(CVBS to HDMI)
C12(HDMI to CVBS)


3G/HD/SDI UP Down Converter
X1 


HD Video Splitter
S1(SDI/ASI Splitter)
S2(HDMI Splitter)


L-Band Splitter
LS


Audio Converter
AC1(A/D)
AC2(D/A)


Audio Splitter
AS1(AES/EBU Digital Audio)
AS2(Analog Audio)


3G/HD/SD-SDI
HD Video Matrix Switcher
MS1(4x4, 8x8, 16x16)


HDMI Twisted Pair Extender
M1  


 


Doteck R1 Series

Datasheet


 

Doteck R1 Series MPEG-2 SD-SDI Encoder

Doteck

Doteck

Features
tSupport MPEG-2 MP@ML(4:2:0) encoding
tSupport SD-SDI, HDMI, CVBS signal input
tSupport full hardware ASI and IP output(TS over IP)
tSupport 576i, 480i video format input
tOutput bit rate can be adjust continuously, easy to operate
tSupport a variety of interface input and output
tSDT insert
tSupport LCD display, front panel button operation and remote Web network management control
tAutomatic recognition signal is supported without manual selection
tHigh reliability design, stable operation
tDouble switch power supply design, wide voltage range, power supply system for a long time reliable work

Introduction
tDoteck R1 series MPEG-2 SD encoder is a kind of easy to operate and powerful encoder. Support SDI, CVBS, HDMI signal interface input, real-time coding of audio and video through the encoder to form a multiplexed code stream(MPTS), the output interface is IP and ASI, fully comply with MPEG-2 standard, has strong compatibility, mainly used in cable TV front end and IPTV live broadcast system SD signal relay.

Technical Specifications

Input interface

HD/SD-SDI

BNC 75Ω

HDMI

HDMI 1.3

CVBS

BNC 75Ω

Resolution

576i50, 480i60


Output interface

ASI

BNC 75Ω DVB-ASI standard

IP

RJ45(1000M), IP/UDP


Video encoding

Video encoding format

MPEG-2

Bit rate

2Mbps-20Mbps

Rate control

CBR, VBR

GOP structure

IBBP


Audio encoding

Sample rate

32KHz, 44.1KHz, 48KHz

Bit rate

64K, 128K, 192K, 256K, 384Kbps

Audio encoding format

MPEG-1 layer 1/2, AAC

Channel

Mono, stereo


Control

Management

Web-based remote network management software

Management interface

RJ45(100M)

LCD display

1

Operation buttons

6


Physical

Dimension(H×W×D, mm)

44×433×343(mm)

Operation temperature

0-50℃

Relative humidity

0-95%, non-condensing

Power supply

130-260VAC, 50/60Hz

 
 
Copyright© 2001 - 2024, Doteck.com, all rights reserved.
Doteck Video USA
Doteck China
Stay connected and follow DoteckDoteck